I had the local pool store test the water and was told I needed shock and MA and lots of MA. I had a test kit on order they said start with 2 gallons of MA in 64oz increments.
5:00PM
64oz MA
128oz Bleach
22oz Polyquart
5:40PM
64oz MA
128oz Bleach
6:30PM
64oz MA
128oz Bleach
Then my test kit showed up and here is what I got
FC 3.2ppm
CC 0.4ppm
PH 7.0
TA 250
CH 200
CYA 0? <--- assuming 0 as the black dot never disappeared
So obviously I need a bit more bleach, should I take it up to Shock Levels since this is a new fill on the pool? Should I add a stabilizer to raise my CYA?
I plan on adding some bleach tonight and retesting tomorrow.
5:00PM
64oz MA
128oz Bleach
22oz Polyquart
5:40PM
64oz MA
128oz Bleach
6:30PM
64oz MA
128oz Bleach
Then my test kit showed up and here is what I got
FC 3.2ppm
CC 0.4ppm
PH 7.0
TA 250
CH 200
CYA 0? <--- assuming 0 as the black dot never disappeared
So obviously I need a bit more bleach, should I take it up to Shock Levels since this is a new fill on the pool? Should I add a stabilizer to raise my CYA?
I plan on adding some bleach tonight and retesting tomorrow.