Pool is all up and full

[Joedirt34]

Pool is all up and full of water ! Checked level all the way around at every T I'm within 1 inche . All good there .
But I have one leg that's not straight up and down when I put a level on it the bubble is just barley in side the marks . If I lift the level ( at the bottom ) about a 1/4 of an inche I'm dead on . How do I move this leg ? Or is this a don't worry thing ? Pool will come down at end of summer . Will be hooking up pump today and posting pictures .

 

[pwrstrk]

I think your fine. Keep an eye on it and enjoy it. ?

 

[Joedirt34]

Thanks for the reply . The leg is dead on left to right just off front to back . My thinking is with some swimmers it may push out a little . Just want it to be safe for the little ones !

 

[pwrstrk]

Thanks for the reply . The leg is dead on left to right just off front to back . My thinking is with some swimmers it may push out a little . Just want it to be safe for the little ones !

Safety doesn't take a holiday. Post a picture of it then we can have a look at it. I still think you'll be fine. ?

 

[Joedirt34]

- - - Updated - - -

 

[pwrstrk]

Still think you'll be fine. If you search the forum there are pictures of pools that are out of level ! ?

 

[Joedirt34]

Just don't want to be that guy ! When you look at the picture of the whole pool it looks more out of level than it really is .
The wall pattern is not even .

 

[pwrstrk]

1 inch out of level is ok. When you get to 2-3 inch's out of level, that can be a problem. Industry standard is 1 inch is ok. ?

 

[mac.dblues]

Just don't want to be that guy ! When you look at the picture of the whole pool it looks more out of level than it really is .
The wall pattern is not even .

Our wall pattern isn't even with the grey part of the liner either. Drives me nuts after all the work I have put into setting up a level pool.

 

[Joedirt34]

Sitting here looking at having a cup of coffee it drives me nuts . If I explain it the wife one more time I think I might be single !