We opened our pool two days ago. When I got it tested today they said all was good except to add some stabilizer. The water is perfectly clear but green. When I asked if it was ok to swim in it she said yes since my chlorine level was in the recommended range, but that I should increase the chlorine to kill the algae and turn it bluer. Is this right? I thought it wasn't safe to swim in green pools because of algae.
Total Chlorine is 1.2 ppm. I increased the swg from 10% to 17% (not sure if this is enough).
Other stats:
Saturation Index: -0.8
Total Chlorine: 1.3 ppm
Combine Chlorine: 0.1 ppm
pH: 7.3
Hardness 95 ppm
Alkalinity: 97 ppm
Cyanuric Acid: 10 ppm
Copper: 0 ppm
Salt: 3200 (my swg reads 3500)
50,000L saltwater pool with vinyl liner and sand filter
Total Chlorine is 1.2 ppm. I increased the swg from 10% to 17% (not sure if this is enough).
Other stats:
Saturation Index: -0.8
Total Chlorine: 1.3 ppm
Combine Chlorine: 0.1 ppm
pH: 7.3
Hardness 95 ppm
Alkalinity: 97 ppm
Cyanuric Acid: 10 ppm
Copper: 0 ppm
Salt: 3200 (my swg reads 3500)
50,000L saltwater pool with vinyl liner and sand filter