Pentair WF 28 C wiring problem

[mortski]

I have a Pentair WF 28 C 2.0 HP. Had some work done on the motor, now have to reconnect it to the system. Thought I could remember where 3 little wires go too, but no, so I could use a little help please. From the wiring diagram it looks like it is wired for high voltage, (white wire is on B, Brown wire on A). The 3 wires that need to be connected are a green (know where that goes) a red and orange wire. Diagram doesn't state where the red (assuming that's the hot wire) goes or the orange wire. I have attached the all the pictures. Any help would be greatly appreciated, thank you.
Dave

 

[JasonLion]

The two power wires connect to the two central connectors, neither of which has any wires going to it in the photo. They should be labeled L1 and L2.

 

[mortski]

The three wires that I have to choice from, are green (know where that goes) red and orange (attached photo) does the read go to L2? thanks

 

[JasonLion]

Green goes to the ground terminal on the chassis.

The other two connect to L1 and L2 (in either order).

 

[mortski]

Great thanks. This has saved me soooo much time...you are the best