Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Need Replacement Parts

  1. Back To Top    #1

    Join Date
    May 2014

    Need Replacement Parts

    Please start your own thread so your question can get the attention it deserves. Hi-jacking other's threads is not allowed. Split from here. Casey~

    we bought a house with a pool already installed. Liner and some of the top rails need to be replaced but we haven't a clue who the manufacturer is. Is there anyway to determine so I can find out if top rails are even available? the caps have eagles on the side of them.

  2. Back To Top    #2
    linen's Avatar
    Join Date
    Jul 2010
    Twin Cities, MN

    Re: Need Replacement Parts

    Welcome to tfp, Berg

    If you posts some close up picks of the uprights, top rails, and caps, someone may recognize it.
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts