Pool is finally done and we are now managing the pool water.
These are the results from my test
pH: 7.5
Cl:2.0
FC:4.5
CC:0
TC: 4.5
TA:70
CH: 140
CYA:30
Here are results from about 3wks ago when the CYA was finally giving a read out. Pool was still technically under PB care...though they didn't test the water much nor come out.
Cl:3
pH:7.6
TA:80
CH: 175
CYA: 35
I was concerned about the low CH levels. The readings should be around 250-350 according to the chart and the readings I am getting are pretty low. I did follow the new directions included in the kit and not the directions on the laminated one.
Am I doing something wrong and should I be worried at this point about the Calcium level?
These are the results from my test
pH: 7.5
Cl:2.0
FC:4.5
CC:0
TC: 4.5
TA:70
CH: 140
CYA:30
Here are results from about 3wks ago when the CYA was finally giving a read out. Pool was still technically under PB care...though they didn't test the water much nor come out.
Cl:3
pH:7.6
TA:80
CH: 175
CYA: 35
I was concerned about the low CH levels. The readings should be around 250-350 according to the chart and the readings I am getting are pretty low. I did follow the new directions included in the kit and not the directions on the laminated one.
Am I doing something wrong and should I be worried at this point about the Calcium level?