Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Valve actuator issues

  1. Back To Top    #1

    Join Date
    Apr 2014

    Valve actuator issues

    Hi, I have a Pentair i+3 system. My problem is that my JANDY valve and actuators have suddenly stopped working/moving. They are programmed to work but are not and neither of them work in manual mode. How do i trouble shoot these to see if the problem is with the pentair or with the valve themselves?

  2. Back To Top    #2
    JasonLion's Avatar
    Join Date
    May 2007
    Silver Spring, MD

    Re: Valve actuator issues

    Check the cords running from the actuator to the control box. The cables have probably gotten disconnected or cut somewhere.
    19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
    Creator of PoolMath and Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts