Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: PDA backlight not working

  1. Back To Top    #1

    PDA backlight not working

    Hi All:

    I have a Jandy PDA system and the backlight on my PDA stop working. Any idea how to fix this? I dont see a way to take this apart. Will Jandy fix it if I sent to them?

    Thank you!
    25,000 vinyl w Hayward Aqua rite salt located north nj. Waterfall, spillover spa, Polaris 280, I-Aqualink 2.0, Solar fully automated,

  2. Back To Top    #2

    In the Industry
    malcolmb5325's Avatar
    Join Date
    Sep 2009
    Sydney, Australia

    Re: PDA backlight not working

    i take it that you have replaced all batteries in the PDA and Aqualink (if it is a PDA only system)? if so then it may be the PDA itself and as it is a waterproof item it is very hard to pull apart and repair. so if you send it back to Jandy i don't think they will repair it. You may need to purchase a new one.
    16,000lts Fibreglass, Magna Mineral Pool Water
    Jandy CV340 Cartridge filter, Zodiac TRi SWC, Z4 iAqualink, Jandy Laminar Jets, Solar Heating, Spa Jets with Jandy 1.5hp Epump operating everything.

  3. Back To Top    #3

    Join Date
    Jan 2015

    Re: PDA backlight not working

    Hi, My PDA is only about 12 months old and the back light is not switching on too.
    Did you have any success with your PDA?


  4. Back To Top    #4

    In the Industry

    Join Date
    Jun 2013

    Re: PDA backlight not working

    Be sure the backlight is set to turn on in the settings. If this is correct and no back light the PDA needs to be replaced.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts