- Aug 25, 2011
- 594
- Pool Size
- 15500
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Getting the pool around and of course my salt was low from over the winter. IC40 said it was 2050, got the same result from my aquachek strips. No problem, get some salt, add it in and aquachek says I'm right around 3000 now, which is right on because that's exactly how much salt I added and planned to get to. However, the IC40 (v2.01, only 2 seasons of use in it)still shows low salt and ET4 is reading is at 2050 still. No change at all!
Power and flow are green. The cell light is off because it's turned off obviously(?) due to low salt.
Any ideas on what I can do to fix this? I've never had to wait very long for the IC40 salt readings to change and it's been hours now with no difference.
Thanks in advance cause you guys collectively rock!
Power and flow are green. The cell light is off because it's turned off obviously(?) due to low salt.
Any ideas on what I can do to fix this? I've never had to wait very long for the IC40 salt readings to change and it's been hours now with no difference.
Thanks in advance cause you guys collectively rock!