Just opened up the pool and got the filter up and running, but having an issue with the SWG cell. The cap will not go back on the cell. I have zero experience with the SWG and was looking for advice. Thanks in advance.
That cap was never meant to be removed from the portion still connected to the cell housing. Also the cable going through the cap is supposed to be connected to the terminals on the part of the cell assembly still connected to the SWG.
There is a nut just below the "cap" which allows you to remove that whole assembly from the SWG case.
Thanks for the reply. I have never seen the cap removed before and now I know why. Called Aqua Comfort and they do not sell parts to the general public and I will have to go with a certified tech. Thanks again...
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!