I know- there are lots of threads on this. I just took out my spacer cell and put my SWG back in a little over a week ago and I am already getting lots of white flakes. Can somebody point out whats wrong with my numbers here? According to my calculations, my CSI is just slightly positive (0.1), so I dont know why I'm having such a problem. I plan on lowering my TA a little bit to adjust the CSI down, but do you think that will help? I have an acid feeder so my Ph doesn't move a lot. I don't have any borates in the pool.
One note- I think my CH regents might be bad- the R-0011L was very thick and took a while to mix in even with speed stir. That said, the number is about what I was expecting. I've ordered a bunch of new regents now so I will repeat once I get them.
Ph: 7.5
FC: 5.5
CC: 0
TA: 70
CH: 575
CYA: 50
Salt: 3000
- - - Updated - - -
Oh, my pool temperature is in the upper 60's to lower 70s.
One note- I think my CH regents might be bad- the R-0011L was very thick and took a while to mix in even with speed stir. That said, the number is about what I was expecting. I've ordered a bunch of new regents now so I will repeat once I get them.
Ph: 7.5
FC: 5.5
CC: 0
TA: 70
CH: 575
CYA: 50
Salt: 3000
- - - Updated - - -
Oh, my pool temperature is in the upper 60's to lower 70s.
Last edited: