My CYA test can't be measured because it becomes too cloudy before it reaches any numbers (so its well over 100). MY pool looks fine but I decided to run tests when my regular chlorine test came up off the charts for a few weeks. I had been putting alot of chlorine in it because I was to busy to give it attention. What should I do????
TC=26.5(FC 26.5; CC=0)
TA 120
CH= not needed
CYA really can't measure cause never reaches numbers on measuring cylinder
PH 7
PS the filtration presure is only around 8PSI cause i apparently am sucking in air somewhere.
TC=26.5(FC 26.5; CC=0)
TA 120
CH= not needed
CYA really can't measure cause never reaches numbers on measuring cylinder
PH 7
PS the filtration presure is only around 8PSI cause i apparently am sucking in air somewhere.