Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 6 of 6

Thread: new to the forum

  1. Back To Top    #1

    Join Date
    Apr 2014
    Location
    Canada
    Posts
    18

    new to the forum

    Hi,

    New to the hot tub/spa life. I have a 2002 Pacific Hot tub that I got in exchange for a service. Wondering where I would post for the issue that I am getting.

    Once the tub heats up it goes into flow error. I have removed the filter and open the pressure switch. I also opened all the knife values and removed the filter. Jets seam to be working fine during heating with the second pump on high. Any ideas on where to start diagnosing? It has a Balboa circuit board model PHT-400.

    Thanks,

    Bandito

  2. Back To Top    #2
    JasonLion's Avatar
    Join Date
    May 2007
    Location
    Silver Spring, MD
    Posts
    37,879

    Re: new to the forum

    Welcome to TFP!

    Hot tub questions are best asked in the tub and spa area.

    You might have something partially blocking the impeller, or the pressure switch might be bad.
    19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
    Creator of PoolMath and Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School

  3. Back To Top    #3

    Join Date
    Apr 2014
    Location
    Canada
    Posts
    18

    Re: new to the forum

    Thankyou

  4. Back To Top    #4
    Casey's Avatar
    Join Date
    Apr 2007
    Location
    SW PA
    Posts
    10,157

    Re: new to the forum

    Welcome to TFP bandito!
    I'd bet you my bikini you'll never get TFP water from a pool store!

    24' Sharkline Venture De Filter

  5. Back To Top    #5
    BoDarville's Avatar
    Join Date
    Jun 2012
    Location
    DFW, Texas
    Posts
    3,840

    Re: new to the forum

    Welcome to the forum!
    Gold Supporter, TFP Lifetime Supporter, 26,680 gal Plaster IGP 3.5 - 10' depth / Attached Waterfall Spa, Manually Chlorinated, Triton Sand Filter, 1.5 HP * 1.1 SF = 1.65 SFHP 1-speed Pentair WhisperFlo WF-26 Pump, 400K BTU NG Teledyne Laars Series One Heater, Polaris 360, Test Kit Comparison, Chlorine/CYA Chart, SLAMing Your Pool, OCLT
    A good test kit is an investment, not an expense.

  6. Back To Top    #6
    pwrstrk's Avatar
    Join Date
    Aug 2012
    Location
    Elverson Pa.
    Posts
    4,758

    Re: new to the forum

    Welcome to TFP !
    Jeff
    24'x54" AG Morada RTR (by wilbar) 13'500 gal. Hayward Powerflo Matrix 1hp 2 speed. Hayward Perflex EC65 DE filter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •