so i have a hayward swim pure plus T-3 swg, and the problem im having is that im now having to clean my cell almost every 5 days. when i test my water for salt with test strips i get a reading of 3700. after cleaning my cell and installing it my swg reads 3700-3800 but after 4-5 days the salt level drops to under 2700 and thus stops generating clorine. the cell is only 1 year old . i know the water here in AZ is very hard (dont know if that has any effect on the cell or the problem im having)
my clorine is fine and my ph is @ 7.6
any input would be appreciated.
my clorine is fine and my ph is @ 7.6
any input would be appreciated.