I was looking at the skimmer the PB plans on installing and noticed that it has a 2 inch connection as well as an 1.5 inch connection. Are both of these used???
Generally one is run to the pump and the other is either capped or connected to the floor drain (not ideal ... better to run the floor separately to the pump as well) or connected to an equalizer line below the skimmer (minor safety feature if the pool water got too low to protect your pump).
I used the 2" pipe, I then hooked a 2" adapter to the 1.5" connector and ran a pipe to that one as well and capped it at the pad. Cheap insurance in the case the one line breaks.
I used the 2" pipe, I then hooked a 2" adapter to the 1.5" connector and ran a pipe to that one as well and capped it at the pad. Cheap insurance in the case the one line breaks.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!