I wish there were more posts or references specific for fiberglass pools as there are for plaster, etc. Today PoolMath suggests I'm at slight risk for corrosion to plaster yet I don't have any to speak of although I do have cement coping. Are there equipment concerns I am unaware of?
Today-
FC 11.5 ( SWG off since fall, autocover protecting from sun and organics, open over winter to breath occasionally but more often now- yay spring!)
CC 0
pH 7.5 (debating if raising to 7.8 is needed to make CSI numbers prettier?)
Temp 60-65
TA 80
CH 240 (seriously soft tap water)
CYA 50 (run slightly low because of protection of autocover)
NA 3400
So does anyone see anything of great concern for my fiberglass pool?
Yippee (Skippy's other half)
Today-
FC 11.5 ( SWG off since fall, autocover protecting from sun and organics, open over winter to breath occasionally but more often now- yay spring!)
CC 0
pH 7.5 (debating if raising to 7.8 is needed to make CSI numbers prettier?)
Temp 60-65
TA 80
CH 240 (seriously soft tap water)
CYA 50 (run slightly low because of protection of autocover)
NA 3400
So does anyone see anything of great concern for my fiberglass pool?
Yippee (Skippy's other half)