Hi, Let's start from the readings:
Cl - 0
pH - 8.2
TA - 90-100
CH - 300
CYA - <20
First pool and just moved to AZ. Was told by pool supply that needed to drain entire pool and refill due to CH being over 800 so I did. Then found TFP... I have not done anything to the pool in two weeks waiting patiently for my TF100 set. PoolMath isn't straight forward to me yet and also needing to know if I add everything at once or one at a time. I've read many instructions but hard to keep straight at this point. I will start with bleach and then go from there. Any other hand-holding to start would be helpful.
Thanks
Cl - 0
pH - 8.2
TA - 90-100
CH - 300
CYA - <20
First pool and just moved to AZ. Was told by pool supply that needed to drain entire pool and refill due to CH being over 800 so I did. Then found TFP... I have not done anything to the pool in two weeks waiting patiently for my TF100 set. PoolMath isn't straight forward to me yet and also needing to know if I add everything at once or one at a time. I've read many instructions but hard to keep straight at this point. I will start with bleach and then go from there. Any other hand-holding to start would be helpful.
Thanks