Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Do all AQUA LOGIC boards have a Varistor?

  1. Back To Top    #1
    maxepr1's Avatar
    Join Date
    Mar 2011
    Location
    DFW
    Posts
    716

    Do all AQUA LOGIC boards have a Varistor?

    Having issues with my system again. This time "LOW SALT" with CHECK SYSTEM light on. I soldiered the leg on the K1 relay a few years ago for a NO FLOW issue. Worked fine until now. Don't see any Varistor like everybody seems to replace? Going to get the cell checked at the store, it is 4-5 years old. My PN on my board is g1-066008g-1 REV.G. My test strip readings are all over the place but each is above the 3000 level. The Varistor in a different place on this board? Thanks
    40'x19' IG Diamond Brite 29K 4' Waterfall/Dive Rock FNS60 DE Inteliflo VS 2hp Whisperflo pumps Aqualogic(P4) SWG TF100 Tester


    Pool School, Pool Calculator,TFTestKits,

  2. Back To Top    #2
    mas985's Avatar
    Join Date
    May 2007
    Location
    Pleasanton, CA
    Posts
    11,486

    Re: Do all AQUA LOGIC boards have a Varistor?

    I think only the AquaRite units have the Varisitor.

    I would check the solder joint again.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •