I see a lot of aqua rite in my google searches, but I dont see any instructions for the Aqua Plus. My salt levels are reading 2500 even though I put two large bags of salt in the last two days. Its been around 30 to 50 degrees during the day, and 20 degrees at night. I inspected my cell and dont see any build up at all. I put the cell back on and checked the plug, it looked fine. I turned the power off, and then on again and the system still read 2500.
Anyone know how to reset/recalibrate a salt cell on a Hayward Aqua Plus? I read all about the Aqua Rites and the Plus's do not have a "diagnostic" button to push and hold. Its in the menu as I scroll across.
Please help
Im thinking I need a new Tcell since the system has been running at 70% chlorinate with no chlorine being generated (Salt being at 3200). Ive been having to put in gallons of bleach a month during the last summer, where the first summer it ran I only had it at 10%. I did notice my hardness levels are pretty high, not sure if thats any issue with it. The pool people said it was low before and added a bunch of calcium during the summer.
Anyone know how to reset/recalibrate a salt cell on a Hayward Aqua Plus? I read all about the Aqua Rites and the Plus's do not have a "diagnostic" button to push and hold. Its in the menu as I scroll across.
Please help
Im thinking I need a new Tcell since the system has been running at 70% chlorinate with no chlorine being generated (Salt being at 3200). Ive been having to put in gallons of bleach a month during the last summer, where the first summer it ran I only had it at 10%. I did notice my hardness levels are pretty high, not sure if thats any issue with it. The pool people said it was low before and added a bunch of calcium during the summer.