- Dec 16, 2013
- 4
We had 3 wonderfully windy days here (So Cal) and it insisted on depositing dirt from landscaping areas around the pool. I had bilateral TKA (knee replacement) and was not able to get out there for 10 days following nature going Wizard of Oz on my yard. I vacuumed the pool into the culvert then brushed it down. The filter ran 24 hrs following the first pass. I came back to it the next day to see that the walls still had mucho dirt on them even after the brushing. It is stubborn and not readily coming off.
I am looking to get the stuff out of the pool without having to get too abrasive. If I scrub it with the regular brush it is slowly coming off but not completely. I have had the same issue in the past but I was out there within 24 hours reviving the pool.
The deposit looks like heavy brown dust.
Thanks, Brian
BTW - first time poster and I am very pleased to make your acquaintances and I am impressed with this fine resource.
FC - 3
CC - 0.0
CYA - 30
PH 7.4
Water Temp 51f
I am looking to get the stuff out of the pool without having to get too abrasive. If I scrub it with the regular brush it is slowly coming off but not completely. I have had the same issue in the past but I was out there within 24 hours reviving the pool.
The deposit looks like heavy brown dust.
Thanks, Brian
BTW - first time poster and I am very pleased to make your acquaintances and I am impressed with this fine resource.
FC - 3
CC - 0.0
CYA - 30
PH 7.4
Water Temp 51f