Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Swim Spa

  1. Back To Top    #1

    Swim Spa

    We had the company come out and close down our swim spa for the summer. In September we started it back up. It seems to be working fine, except that possibly the motor seemed louder. We weren't shur, but I contacted the company and they said keep an eye on it.
    Now, jet one is not circulating at all. Jet two is working as normal.
    We have bled the air, and backwashed. Jet one is still not working. We found nothing clogging the lines. Any advise?

  2. Back To Top    #2
    linen's Avatar
    Join Date
    Jul 2010
    Twin Cities, MN

    Re: Swim Spa

    Welcome to tfp, OctoberMorning13

    I am sorry no one has responded yet to this post.

    Unfortunately, I am not familiar with your setup. Is "Swim Spa" a particular brand, or is just describing the function of your spa?
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts