Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 5 of 5

Thread: Steve G from Southern New Hampshire - new inground pool

  1. Back To Top    #1

    steveg_nh's Avatar
    Join Date
    Oct 2013
    Location
    Southern NH
    Posts
    825

    Steve G from Southern New Hampshire - new inground pool

    Hi All,

    Just wanted to say hello and that I have a lot to learn. We just had a 24x40' free form vinyl liner pool installed here in southern NH. It has a salt water chlorine gen system, and heat pump. I have a lot to learn, as I know about about general pool care, but not that much when it comes to really making sure the water is right, etc. And salt systems are very new to me. So here's to hoping you don't mind questions!
    24'x40' 25k gal Imperial Mountain Pond IGP, full 28 mil VynAll Ocean Breakers liner. All Hayward system: 140k BTU HeatPro heat pump, 3/4HP single speed TriStar 2" Pump, DE6020 filter, AquaPlus Automation/Salt Chlorination, remote controls, ColorLogic 4.0 lighting. Polaris 280 w/PB4-60 BP. TF100 & K1766 test kits. Rinox Palazzo pavers and Spherik coping. Pool installed 9/2013, project completed 6/16/14.

  2. Back To Top    #2
    BoDarville's Avatar
    Join Date
    Jun 2012
    Location
    DFW, Texas
    Posts
    3,840

    Re: Steve G from Southern New Hampshire - new inground pool

    Welcome to TFP!
    Gold Supporter, TFP Lifetime Supporter, 26,680 gal Plaster IGP 3.5 - 10' depth / Attached Waterfall Spa, Manually Chlorinated, Triton Sand Filter, 1.5 HP * 1.1 SF = 1.65 SFHP 1-speed Pentair WhisperFlo WF-26 Pump, 400K BTU NG Teledyne Laars Series One Heater, Polaris 360, Test Kit Comparison, Chlorine/CYA Chart, SLAMing Your Pool, OCLT
    A good test kit is an investment, not an expense.

  3. Back To Top    #3
    linen's Avatar
    Join Date
    Jul 2010
    Location
    Twin Cities, MN
    Posts
    8,649

    Re: Steve G from Southern New Hampshire - new inground pool

    Welcome to tfp, steveg_nh
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

  4. Back To Top    #4
    Patrick_B's Avatar
    Join Date
    Jun 2011
    Location
    Midland TX
    Posts
    15,001

    Re: Steve G from Southern New Hampshire - new inground pool

    Howdy Steve and welcome.

    Start with the ABC's in Pool School. It will help you get going with the essential basics.
    TFP Moderator
    Essential Links:
    ABC's Of Pool Chemistry, Test Kits, SLAM Your Pool
    28K Gal IG FreeForm, CLI Quartz, Pentair 36"SF & VS Pump, Dolphin M5, Rheem

  5. Back To Top    #5

    steveg_nh's Avatar
    Join Date
    Oct 2013
    Location
    Southern NH
    Posts
    825

    Re: Steve G from Southern New Hampshire - new inground pool

    Thanks guys!
    24'x40' 25k gal Imperial Mountain Pond IGP, full 28 mil VynAll Ocean Breakers liner. All Hayward system: 140k BTU HeatPro heat pump, 3/4HP single speed TriStar 2" Pump, DE6020 filter, AquaPlus Automation/Salt Chlorination, remote controls, ColorLogic 4.0 lighting. Polaris 280 w/PB4-60 BP. TF100 & K1766 test kits. Rinox Palazzo pavers and Spherik coping. Pool installed 9/2013, project completed 6/16/14.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •