I have a letro legend II and the back end is sticking up. The back wheels will not set flat on the pool surface. Any tips would be greatly appreciated.
Letro Legend II problems
- Thread starter djbee761
- Start date
Hi djbee761! Welcome to TFP! I too have a Letro. You will need to play around with the jets on the back a little. They probably need to be pushed up some. A very little amount of change will make a big difference so don't over do it.
Hope that helps!
Karen
Hope that helps!
Karen
OK, thanks for the advice but this happens even while the pump is not running . The back end is up off of the bottom.
Thanks.
Thanks.
- Jun 20, 2012
- 439
djbee761 said:
Try sliding the ballast float (the egg shaped thing sticking out of the mast) forward a little bit.
Are you talking about when it's not on? Mine does that sometimes but I don't worry about it. If it's doing that while it's on, then that is when an adjustment to the valves in the back or the ballast float will correct that. Otherwise, it's no big deal.
