- Sep 1, 2013
- 21
Finally got my "new to me" swim spa filled after taking care of a few mechanical issues with the seals. This thing has been sitting empty for about a year since it was taken out of service by the previous owner
I am new to this pool thing and want to use the BBB system... have added some bleach already as it filled.
I picked up a Taylor test kit and here are my first water tests:
FC - 4
CC - .5
ph - 8
TA - 175
CH - 170
CYA - no reading ... dot stayed visible.
So going to the Pool Calculator, I can figure out what I need to add but it seems I should maybe "Shock" it first and try to get rid of the CC ?
Seems like adding all that stuff at once might be to much ...
Suggestions?
Thanks!
Bruce in SB
I am new to this pool thing and want to use the BBB system... have added some bleach already as it filled.
I picked up a Taylor test kit and here are my first water tests:
FC - 4
CC - .5
ph - 8
TA - 175
CH - 170
CYA - no reading ... dot stayed visible.
So going to the Pool Calculator, I can figure out what I need to add but it seems I should maybe "Shock" it first and try to get rid of the CC ?
Seems like adding all that stuff at once might be to much ...
Suggestions?
Thanks!
Bruce in SB