I'm sure it's the heat exchanger and we will not replace it--to darn expensive. My questions is--Can you still use the heater if it's leaking? My thought is just heat the pool and then bypass the heater after it's heated.
Jandy Lite2 Leaking--Still Use it?
- Thread starter lhayes1976
- Start date
Pool Clown
In The Industry
My first thought is no. Water is a killer. I should say leaks are killers (to pool equipment). If you aren't going to fix it, but replace it next year, go ahead and run it. I would suggest though that you camp out with a lawn chair about 15 feet from it(babysit) so you can shut the gas off if it catches fire or something like that. See, depending on where the leak is you may be soaking the firebrick/refractory to a point where it collapses onto the burner tray, and that's where you may get the fire from.
Posting this reply is going to get a reaction from all the responsibles out there, so, IM KIDDING! NO, DON"T RUN IT! Fix it, or chuck it!
Posting this reply is going to get a reaction from all the responsibles out there, so, IM KIDDING! NO, DON"T RUN IT! Fix it, or chuck it!
Similar threads
