Hello All, First time homebuyer and pool owner, knows nothing about pool, its been 2 weeks still struggling to set the pool right before I allow my kids to swim. I have ordered my TF100 kit and it should be here by mid next week, below are the readings from Leslies ( Got this two days back)
Free Chlorine - 0 (LOW)
Total Available Chlorine - 0 (LOW)
Calcium Hardness - 300
Cyanuric acid - 70
TA - 60 ( LOW)
PH - 7 (LOW)
Phosphates - 100
Based on Leslies recommendation, I added below items to the pool as per the instruction label
1. CHLOR BRITE - 3lbs ( He told this is shock)
2. SODA ASH - 4lbs
Added # 1 and #2 after 12 hours apart, pool running at least 8 hours per day, water looks clear. Also, sine I am unable open the inline chlorinator cap, dumped three 3" tablets each in two skimmers. Please help me in getting the chemistry right so that kids can swim at least by this Sunday if possible.
Free Chlorine - 0 (LOW)
Total Available Chlorine - 0 (LOW)
Calcium Hardness - 300
Cyanuric acid - 70
TA - 60 ( LOW)
PH - 7 (LOW)
Phosphates - 100
Based on Leslies recommendation, I added below items to the pool as per the instruction label
1. CHLOR BRITE - 3lbs ( He told this is shock)
2. SODA ASH - 4lbs
Added # 1 and #2 after 12 hours apart, pool running at least 8 hours per day, water looks clear. Also, sine I am unable open the inline chlorinator cap, dumped three 3" tablets each in two skimmers. Please help me in getting the chemistry right so that kids can swim at least by this Sunday if possible.