- Jun 17, 2012
- 54
- Pool Size
- 21870
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Before I start troubleshooting my problem, I'd like to have a starting point. I replaced the motor last year, so I would not consider it old. I usually run it 24/7 during the pool season and usually shut it off during the off season unless to pump it out after some heavy rains.
Just recently, I've noticed some delay when I turn the pump back on when I backwash. The last time I did this it seemed to be a little longer than before (maybe a second). Could this be the motor, or could it be something like the capacitor? I'm not much on troubleshooting electrical issues, but can get through it with good directions.
Any thoughts?
Just recently, I've noticed some delay when I turn the pump back on when I backwash. The last time I did this it seemed to be a little longer than before (maybe a second). Could this be the motor, or could it be something like the capacitor? I'm not much on troubleshooting electrical issues, but can get through it with good directions.
Any thoughts?