Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Aqua Rite - still generating at 4700

  1. Back To Top    #1

    Aqua Rite - still generating at 4700

    Just replaced my T-cell-15 when I realized the low reading was a bad cell. Chemical test and the SWG both now show a reading of 4600-4700 which is very high, but the SWG does not have the High Salt light on and it continues to generate after 72 hours. Chlorine levels are also remaining stable. At this point in the season, with only 2-3 weeks of swimming left, I'd hate to replace ~6000 gallons of water (we have a well, so have to pay for water delivery).

    Is there a problem with my PCB board since the High Salt light isn't coming on and it is still generating?

    Is there a problem to just let it keep running like this until the end of the season?

  2. Back To Top    #2

    Re: Aqua Rite - still generating at 4700

    I think it will work up to 5, 000 ppm if the amps are less than 8. How many amps?

  3. Back To Top    #3

    Re: Aqua Rite - still generating at 4700

    It's running around 7.5-7.8 amps @ ~22.8V.

  4. Back To Top    #4

    Re: Aqua Rite - still generating at 4700

    I think that you're ok. You might have a problem if you heat the water as that might make the current exceed 8 amps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •