Hi - I have PebbleSheen going in tomorrow (Monday), acid wash Tuesday, with fill immediately thereafter. I have read through the Pool School and forum and have the TF-100 test kit.
My fill water is:
TC 1.0
FC 0.5
CC 0.5
Ph 7.5
TA 200
CH 180
CYA 0
My understanding is upon filling to address the chemicals in this order: Ph, CYA, FC
1) Since my Ph is ok, nothing to do except monitor (If it drops I will aerate to try to lower TA some)
2) Add stabilizer - Pool Calc for my 12k gallon pool recommends 48 oz granules, or 125 oz liquid - solid added using nylon, ok to pour liquid into skimmer
3) Add bleach - Pool Calc recommends 81oz of 8.25% bleach - add through skimmer
Any thoughts, comments, criticisms, or corrections are appreciated!
My fill water is:
TC 1.0
FC 0.5
CC 0.5
Ph 7.5
TA 200
CH 180
CYA 0
My understanding is upon filling to address the chemicals in this order: Ph, CYA, FC
1) Since my Ph is ok, nothing to do except monitor (If it drops I will aerate to try to lower TA some)
2) Add stabilizer - Pool Calc for my 12k gallon pool recommends 48 oz granules, or 125 oz liquid - solid added using nylon, ok to pour liquid into skimmer
3) Add bleach - Pool Calc recommends 81oz of 8.25% bleach - add through skimmer
Any thoughts, comments, criticisms, or corrections are appreciated!