Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Where to find 1 1/2" heater to PVC threaded unions?

  1. Back To Top    #1
    zimm's Avatar
    Join Date
    May 2013
    Location
    Northern Virginia
    Posts
    421

    Where to find 1 1/2" heater to PVC threaded unions?

    My Teledyne heater has 1.5" metal pipes with a flange, then there's an o-ring/union on the PVC side that screws together. I need to replace both of them. What am I looking for and where can I buy them?

    Here's a pic of my SWG, but you can see the black collar on the metal pipe coming down from the heater. I need the PVC joints and o-rings....

    45'x12' 17k gal, IG plaster, Pool Pilot Nano+ SWG, 1/2hp Whisperflo pump, PAC-FAB TA-60D sand filter, Raypak 266 heater
    Pool School + Test Kit + Pool Math = Trouble Free Pool

  2. Back To Top    #2

    Join Date
    Feb 2008
    Location
    Denton, TX
    Posts
    5,061

    Re: Where to find 1 1/2" heater to PVC threaded unions?

    My best bet would be a plumbing supply place. I don't think that Home Depot or the more common places would have the black pipe with a flange. You could check though. Some seem to have better selections than others.

  3. Back To Top    #3
    zimm's Avatar
    Join Date
    May 2013
    Location
    Northern Virginia
    Posts
    421

    Re: Where to find 1 1/2" heater to PVC threaded unions?

    I found these and ordered a pair. I hope they work. They have split nuts if the original ones don't fit.
    http://www.magicplastics.com/vnf_uniona.htm
    0611-15

    45'x12' 17k gal, IG plaster, Pool Pilot Nano+ SWG, 1/2hp Whisperflo pump, PAC-FAB TA-60D sand filter, Raypak 266 heater
    Pool School + Test Kit + Pool Math = Trouble Free Pool

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •