HELP!!!!!Ok here we go.. here is a recap of the past few weeks. Pool was not holding chlorine, pool store said phosfates were 10000.00 do a phos floc. Didnt work. Next they said chlorine lock up. Do Bioguard Burnout. Didnt work. Next they said do 50 pounds of burnout. thats where I put the brakes on!! During both the phosfate fix and the burnout I have had to adjust my ph because it messed with it. I have just been adding 2 gallons of bleach (10%) a day to hold chlorine untill I decide what to do. This morning as a last ditch attemp I added 10 gallons of bleach. Not sure what to do. Pool looks crystal clear and all readings except CYA and chlorine look good. I know my CYA levels are too high at 100. Do I need need to drain half of the water or is there any other way to fix? Was planning on draining half at the beginning of the season nexy year due to CYA so that I can do the BBB method. I also turned off my auto chlorinator that feeds the pucks. I also rum the pump 24/7. Here is info on my pool and what the readings are..
16x32 inground vinyl liner1 year old
Chlorine 0
PH 7.2
TA 135
CYA 106
Hardness 212
Phosfates 500
16x32 inground vinyl liner1 year old
Chlorine 0
PH 7.2
TA 135
CYA 106
Hardness 212
Phosfates 500