Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: GFCI Replacement

  1. Back To Top    #1
    tagprod's Avatar
    Join Date
    Jul 2007
    Location
    Tomball, Texas
    Posts
    489

    GFCI Replacement

    I'm going to check on Monday with the builder, but is there anything special about the GFCI outlet? Looks like the power to the main board and the lights are coming off that outlet. I have a 20amp 125v installed, but it feels hot around the display.
    Brian
    20K IG Gunite w/ raised 7ft spillover spa. 1.5 HP Hayward Northstar pump 425 sq ft Hayward cartridge filter, Colorlogic lights AquaRite SWG AquaLogic PS-8 control
    1hp pump for sheer descent

  2. Back To Top    #2
    Isaac-1's Avatar
    Join Date
    May 2010
    Location
    SW Louisiana
    Posts
    6,711

    Re: GFCI Replacement

    I think we need to know a bit more about what your talking about, what "display", etc?
    Indoor 20x40 35,000 gallon vinyl pool with 1.5 HP 2 speed Jandy FloPro pump, Hayward EC75 Perflex DE filter, 11 4x12 Techno-Solis solar panels w/ Aquasolar controller, Aquabot Turbo T Robot Cleaner. Also LMI metering chlorine dispenser pump and HotSpring Jetsetter
    I use and endorse TFtestKits TF-100 from http://tftestkits.net
    ~Remember TFP counts on your donations to keep this site ad free~

  3. Back To Top    #3
    tagprod's Avatar
    Join Date
    Jul 2007
    Location
    Tomball, Texas
    Posts
    489

    Re: GFCI Replacement

    check the link
    Attached Images Attached Images
    Brian
    20K IG Gunite w/ raised 7ft spillover spa. 1.5 HP Hayward Northstar pump 425 sq ft Hayward cartridge filter, Colorlogic lights AquaRite SWG AquaLogic PS-8 control
    1hp pump for sheer descent

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •