Hello all! I SLAM'd last weekend (had to go to 28 on chlorine, as I had just upped my CYA to 80). Passed OCLT Sunday night. Had my Nano set at 100%, (had issues with Nano pool volume set too low).
Water is crystal clear.
I have not added liquid chlorine since last Sunday.
I tested again this morning(pump and Nano ran all night to vacuum:
FC. 16.5
CC. 0
TA. 90
CYA 80
Ph. 7.8 (need to adjust after swimming today)
I also tested the water straight out of the Nano. 12.5 FC
I know that I need to adjust my Nano % to not produce too much chlorine, but I'm not sure if there is a step by step procedure for this. I have searched the forum, but don't see what I'm looking for.
Any instructions would be appreciated. Pool is in full sun until about 6:00 p.m.
Thank you,
Alynn
22,000 Gallon In Ground with CrystalStone (pebble) finish in Blue Ice
Pool Pilot Digital Nano SWG
Pentair 1.0 HP Pump
Hayward C1200 (120 S.Ft.) Cartridge Filter
Pentair Great White Automatic Pool Cleaner
TF-100 Test Kit
Water is crystal clear.
I have not added liquid chlorine since last Sunday.
I tested again this morning(pump and Nano ran all night to vacuum:
FC. 16.5
CC. 0
TA. 90
CYA 80
Ph. 7.8 (need to adjust after swimming today)
I also tested the water straight out of the Nano. 12.5 FC
I know that I need to adjust my Nano % to not produce too much chlorine, but I'm not sure if there is a step by step procedure for this. I have searched the forum, but don't see what I'm looking for.
Any instructions would be appreciated. Pool is in full sun until about 6:00 p.m.
Thank you,
Alynn
22,000 Gallon In Ground with CrystalStone (pebble) finish in Blue Ice
Pool Pilot Digital Nano SWG
Pentair 1.0 HP Pump
Hayward C1200 (120 S.Ft.) Cartridge Filter
Pentair Great White Automatic Pool Cleaner
TF-100 Test Kit