My above ground pool has been opened a week. I've used the pool calculator and it seems everything is in check. I ordered the TF-100 kit and hopefully it will arrive soon.
In the meantime, here are my levels for a 4625 gallon Intex Ultra Frame Pool with a filter pump and SWG.
These results are with a reagent drop test.
FC 2.0
CC 0
pH 7.2
TA 80
I've used strips for the results below:
TH 100
TC 1
FC 3
pH 7.2
TA 80
Stabilizer 40
The water looks clear. I had to adjust the pH (adding muriatic acid) because it was running at 7.8 and the TA was at 130 and is now down to 80 and the pH is a little low at 7.2.
Does anyone see any concerns or have any suggestions? I added 15 oz of bleach this evening also (according to the Pool Cal).
Is my stabilizer at a good level? I added it a week ago (1 pound of cyanuric acid).
Hopefully I will have more reliable numbers once the TF-100 arrives.
Two weeks ago I knew nothing about this "stuff." I've followed the advice and read and re read Pool School. It does help.
Any suggestions or advice or reassurance is appreciated.
Thanks
In the meantime, here are my levels for a 4625 gallon Intex Ultra Frame Pool with a filter pump and SWG.
These results are with a reagent drop test.
FC 2.0
CC 0
pH 7.2
TA 80
I've used strips for the results below:
TH 100
TC 1
FC 3
pH 7.2
TA 80
Stabilizer 40
The water looks clear. I had to adjust the pH (adding muriatic acid) because it was running at 7.8 and the TA was at 130 and is now down to 80 and the pH is a little low at 7.2.
Does anyone see any concerns or have any suggestions? I added 15 oz of bleach this evening also (according to the Pool Cal).
Is my stabilizer at a good level? I added it a week ago (1 pound of cyanuric acid).
Hopefully I will have more reliable numbers once the TF-100 arrives.
Two weeks ago I knew nothing about this "stuff." I've followed the advice and read and re read Pool School. It does help.
Any suggestions or advice or reassurance is appreciated.
Thanks