Hi all first post and just joined. Been up all night reading and gathering info. So much to learn!
Well I'm a new pool owner and some problems just started to happen in the last few days.
Usually the spa over flows into the main pool but now it hardly flows at all.
The skimmer is sucking and the return to main pool is working but has small bubbles like soda or wine. The vacuum at the skimmer isn't working as efficient as it use to be.
So I checked the pressure gauge and it is about 21-22psi. But when I turn off the motor it will only drop to 20psi. So I try to release the pressure with the manual relief valve but it still stays about 19-20Psi.
On the gauge it says turn 3 full turns to release pressure. I've turn it more then that and no more air is coming out. Is the gauge bad or can there still be pressure in the tank some how. I want to clean the filter but afraid the top of the tank would pop off in my face.
Thanks for your help
Well I'm a new pool owner and some problems just started to happen in the last few days.
Usually the spa over flows into the main pool but now it hardly flows at all.
The skimmer is sucking and the return to main pool is working but has small bubbles like soda or wine. The vacuum at the skimmer isn't working as efficient as it use to be.
So I checked the pressure gauge and it is about 21-22psi. But when I turn off the motor it will only drop to 20psi. So I try to release the pressure with the manual relief valve but it still stays about 19-20Psi.
On the gauge it says turn 3 full turns to release pressure. I've turn it more then that and no more air is coming out. Is the gauge bad or can there still be pressure in the tank some how. I want to clean the filter but afraid the top of the tank would pop off in my face.
Thanks for your help