- May 30, 2012
- 1,619
- Pool Size
- 17000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
I've read some good reviews on this product. A question somewhat related.... I have a dedicated pressure line/booster pump for my retired pressure side cleaner. I was thinking of piping that directly into other return line and using it as the supply for a PoolSkim. This is piped with much smaller pipe (1" I think), will this make the Poolskim work better because it will likely be higher velocity? The return is in a good spot for a secondary skimmer (opposite the main skimmer and downwind).
Question #2. Can you buy 90 degree fittings that will connect to existing returns (instead of ball joints)? I can only direct the return water at about 45 degrees. I think if all could be set at 90 degrees, the water would rotate all the crud to the skimmer much faster.
Question #2. Can you buy 90 degree fittings that will connect to existing returns (instead of ball joints)? I can only direct the return water at about 45 degrees. I think if all could be set at 90 degrees, the water would rotate all the crud to the skimmer much faster.