Hi all,
3rd day of new fill and looking pretty good on my numbers:
FC: 5.5
PH: 7.5 (ever so slightly increasing the last three days)
TA: 160 (fluctuates up and down the last 3 days, not by much)
CH: 120 (slowly declining by increments of 20 the last 3 days)
CYA: 35
CC: 0
I'm just tweaking and adjusting where needed, but I don't really know what to put in the Pool Calculator for my "goal" for TA and CH (or do I just use the Pool Calc's goal number?) When I read Pool School and the ABC's (for vinyl pools), TA and CH has such a large range of numbers. :uhh:
What am I really shooting for with TA and CH? For instance, it says for TA, "60-120, sometimes higher." How high is too high, because I'm at 160?
For CH, it says, "50-300." Right in the middle should be pretty good then, right?
Thanks for any input!
3rd day of new fill and looking pretty good on my numbers:
FC: 5.5
PH: 7.5 (ever so slightly increasing the last three days)
TA: 160 (fluctuates up and down the last 3 days, not by much)
CH: 120 (slowly declining by increments of 20 the last 3 days)
CYA: 35
CC: 0
I'm just tweaking and adjusting where needed, but I don't really know what to put in the Pool Calculator for my "goal" for TA and CH (or do I just use the Pool Calc's goal number?) When I read Pool School and the ABC's (for vinyl pools), TA and CH has such a large range of numbers. :uhh:
What am I really shooting for with TA and CH? For instance, it says for TA, "60-120, sometimes higher." How high is too high, because I'm at 160?
For CH, it says, "50-300." Right in the middle should be pretty good then, right?
Thanks for any input!