Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Pool Light Sealing Ring?

  1. Back To Top    #1

    Pool Light Sealing Ring?

    Howdy Folks.

    Can a pentair pool light sealing ring be changed without draining the pool below the light? I replaced my liner last spring and the pool light sealing ring has a rust spot which is leaving a stain on my new liner.

    Seem to me it can be done "quickly" just want to be sure before I really muck things up!

    Thanks

  2. Back To Top    #2

    In the Industry

    duraleigh's Avatar
    Join Date
    Apr 2007
    Location
    Sebring, Florida
    Posts
    30,077

    Re: Pool Light Sealing Ring?

    I assume you are talking about the decorative outside retaining ring. It usually comes off with one small screw right at the top.
    Dave S.
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

  3. Back To Top    #3

    Re: Pool Light Sealing Ring?

    No, Its the 10 hole ring that sandwiches the liner to the pool wall, or holds the bulb bucket in.

    Forgot to mention its an in ground. 18x36 8ft deep.

  4. Back To Top    #4

    In the Industry

    duraleigh's Avatar
    Join Date
    Apr 2007
    Location
    Sebring, Florida
    Posts
    30,077

    Re: Pool Light Sealing Ring?

    I have done it twice only but it seems to me I remember it not beeing really "quick" Nevertheless, it is very doable just by removing those 10 screws.
    Dave S.
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •