After getting "pool stored" for a couple of years, and now finding this site, my TF-100 arrived today. Here are my numbers. To start with, I was thinking of draining about 25% of my water, due to the high CH/TA, then adjusting what I need tomorrow as far as PH/FC/Borate/(possible CYA if I need it or maybe should wait?). Any thoughts? I would appreciate the help. I have a party on the 4th, so I could wait till after, but I am very nervous about having the high CH/TA, since my salt cell had to be replaced after 1.5yrs. from scaling. I have also been playing with the pool calc, and read a tremendous amount about CSI, but have a hard time following the CSI/CH/TA.
Borate= 50-60
PH= 7.6
FC= 3
CC= 1
TC= 4
TA= 170
CH= 400
CYA= 35 (but I did add 2lbs in socks in the skimmers, that just totally dissolved yesterday)
Salt=3400
I have a vinyl lined pool, 20x40 9ft. deep end, cartridge filter, swg, 1.5 Jandy variable pump, autocover.
Borate= 50-60
PH= 7.6
FC= 3
CC= 1
TC= 4
TA= 170
CH= 400
CYA= 35 (but I did add 2lbs in socks in the skimmers, that just totally dissolved yesterday)
Salt=3400
I have a vinyl lined pool, 20x40 9ft. deep end, cartridge filter, swg, 1.5 Jandy variable pump, autocover.