My pool is a vinyl liner in ground total calculated 31,590 Gal. (rounding to 32,000) with a sand filter running 24/7 (Hayward pro series model S220T) and a 1 HP. pump motor. I am using a Taylor K 2006 test kit. After reading all of Pool School and multiple post I wanted to ask your suggestions. My ordeal started on 6/13/2013. My FC level was 0 My PH. was above 8.0 my TA. was 140 My CH was 8.0 My CYA was 30 35 range.
Now I see that after 7 days of doing (as best I could) what was instructed here all looks pretty well except for some continued cloudy water. I found that I way backwashing way too often and have corrected that. My current readings are....................
FC. 2.6 (I know that needs to come up)
CC. 0.2 if that probably a bit lower
PH. 7.4
TA. Around 75 (On the kit it shows somewhere between 70 and 80)
CH. shows 0 (best I could determine)
CYA. is closer to 30 than 40 (best I could determine)
So, I guess I would please ask what I should do if anything at this point. thank you for your continued efforts ! With best regards, vsat88.
Now I see that after 7 days of doing (as best I could) what was instructed here all looks pretty well except for some continued cloudy water. I found that I way backwashing way too often and have corrected that. My current readings are....................
FC. 2.6 (I know that needs to come up)
CC. 0.2 if that probably a bit lower
PH. 7.4
TA. Around 75 (On the kit it shows somewhere between 70 and 80)
CH. shows 0 (best I could determine)
CYA. is closer to 30 than 40 (best I could determine)
So, I guess I would please ask what I should do if anything at this point. thank you for your continued efforts ! With best regards, vsat88.