Turbo cell -HELP!!

[th59fi]

I am new to the site and am looking for help-I have a Goldline Turbo cell-salt generator(Tcell-15)and have a no flow error-the flow sensor seems to be part of the Turbo cell?How can I trouble shoot??Thanks for the help-

 

[jblizzle]

Welcome to TFP!!!

The flow sensor the the Goldline is NOT in the cell. It is a little black piece inserted on the middle of a Tee fitting. Check that wire to make sure it is not chewed up or cut.

 

[th59fi]

Wow-I thought that was a temp sensor and the white wire from the cell was the flow switch-The wire was cut(CHEWED) right off!!!I will resplice and give it a try in the morning-Cant thank you enough !!!!!-I finally feel I found a place to help with pool questions-wish my weekly service guy would have found it??

 

[jblizzle]

Sorry it took all of 2 minutes to answer your question :lol:

 

[th59fi]

I probably should replace the flow sensor with new wire-do you know where its best to get a replacement-Thanks again..

 

[mas985]

It is basically phone wire and you can get that almost anywhere: Walmart, Home Depot, Lowes

 

[th59fi]

OK-WILL GIVE IT A TRY-TKS

 

[Melt In The Sun]

You can splice it with tiny wire nuts and then a good tape job...that's what I did when a rat chewed through mine.

 

[th59fi]

thanks-Ill try that for now-dont know why they like pool parts??