Hello,
Just ordered a Liquidator probably should have asked for advice first. This is my second season thought I should try some automatic bleach dispensing vs. manual every day....
1. Planning to hook it up to the main pump basket drain plug and heater drain plug. Just realize I have a device "Vacless" (see photo )with a gauge (guess is a pressure measurement device). It measured about 22 (can't tell what the unit of measure is but the one on my waterfall feature says "Hg) when I run my pump at low speed (1950rpm) and 26 at 3150rpm. With this kind of pressure, is Liquidator suitable for my pool?
2. There are 2 drain plugs on my heaters - I think one is for water "going in" the other plug is for the water "coming out" of the heater. Which plug would you recomment to hook up the Liquidator?
3. Notice there are pocket of air bubble in my main pump (Jandy variable speed) and water feature pump as well. The air is especially noticable at low speed but at high speed it is significant less. Read in different topics that this might be normal for variable speed pump? but will that negatively impact the performance of the liquidator?
Appreciate yourthoughts...
thanks
Hean
[attachment=2:27cysg73]IMG_0335.jpg[/attachment:27cysg73]
[attachment=1:27cysg73]IMG_0336.jpg[/attachment:27cysg73]
[attachment=0:27cysg73]IMG_0337.jpg[/attachment:27cysg73]
Just ordered a Liquidator probably should have asked for advice first. This is my second season thought I should try some automatic bleach dispensing vs. manual every day....
1. Planning to hook it up to the main pump basket drain plug and heater drain plug. Just realize I have a device "Vacless" (see photo )with a gauge (guess is a pressure measurement device). It measured about 22 (can't tell what the unit of measure is but the one on my waterfall feature says "Hg) when I run my pump at low speed (1950rpm) and 26 at 3150rpm. With this kind of pressure, is Liquidator suitable for my pool?
2. There are 2 drain plugs on my heaters - I think one is for water "going in" the other plug is for the water "coming out" of the heater. Which plug would you recomment to hook up the Liquidator?
3. Notice there are pocket of air bubble in my main pump (Jandy variable speed) and water feature pump as well. The air is especially noticable at low speed but at high speed it is significant less. Read in different topics that this might be normal for variable speed pump? but will that negatively impact the performance of the liquidator?
Appreciate yourthoughts...
thanks
Hean
[attachment=2:27cysg73]IMG_0335.jpg[/attachment:27cysg73]
[attachment=1:27cysg73]IMG_0336.jpg[/attachment:27cysg73]
[attachment=0:27cysg73]IMG_0337.jpg[/attachment:27cysg73]