Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: aqua rite keeps blowing fuses immediately

  1. Back To Top    #1

    Join Date
    Jun 2013
    Bel Air Maryland

    aqua rite keeps blowing fuses immediately

    My board has no burn marks,all connections are very tight.What could be problem.I am new to this site sorry if i could not find previous post on subject.
    30,000 gals./ In ground/Vinyl liner/Cartridge filter/A.O Smith 1 1/2 HP Pump/Pool Installed in 2008/Tf-100 test kit just ordered/Aqua-Rite SWG/well water

  2. Back To Top    #2
    linen's Avatar
    Join Date
    Jul 2010
    Twin Cities, MN

    Re: aqua rite keeps blowing fuses immediately

    Welcome to tfp, bucadam

    I used the google search at the very low left of page. Here is one of the results:
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts