another help me wire my pump ????

[umahunter]

Ok I have a 1hp pentair superflo 2 speed with toggle switch being wired to a dual intermatic timer t104106 heres my question my pump diagram shows 3 wires red to the board green to ground and black to the toggle but the diagram in my timer box shows 4 wires one to ground common (red) to #4 then one wire to high and one to low so do I need to add another wire if so to where or do i not because of the toggle and switch it manually thanks for any help I can take pics if needed

 

[Bama Rambler]

If you want the timers to start and stop the pump and switch the speeds then you need the 4th wire.

Green to ground screw,
L1 to term 1 on the T104
L2 to term 3 on the T104
Com from the pump to term 4 on the T104
Low from pump to term 2 on the T106
High from pump to term 3 on the T106
A jumper from term 1 on the T106 to term 4 on the T106
A jumper from term 1 on the T106 to term 2 on the T104

 

[umahunter]

So if I do it this way do i leave the toggle hooked up or cap that line and hook to the board

 

[Bama Rambler]

Unhook the switch if you use the timer. You don't want the switch set one way and the timer the other.

 

[umahunter]

Thanks shes up and runin

 

[Bama Rambler]