Hi - I have two identical green Raypak heaters (model: P-M206A-EN-C). One is for the hot tub and the other for the pool. The spa heater circuit board went out about 2 months ago and I had it replaced for $450. Works great now but i wish i would've found TFP before I spent all that money and probably could've done it myself with TFPs help for a little cheaper
The pool heater has been acting up since last season. It will CFH and then stay in perpetual SPK mode but will not always fire up. I usually here a sparking sound when in SPK mode for a few seconds and then a loud click and it fires up. For the last few days, it will not fire up but just stays in SPK mode and I can smell gas. I followed the instructions on the label of the heater to open the panel, turn off the electronic ignition, turn off the power switch, wait 15-20 mins and try again. This is how I've been dealing with this problem since last year. Now that won't work either and it just stays in SPK mode.
Any help is greatly appreciated!!
The pool heater has been acting up since last season. It will CFH and then stay in perpetual SPK mode but will not always fire up. I usually here a sparking sound when in SPK mode for a few seconds and then a loud click and it fires up. For the last few days, it will not fire up but just stays in SPK mode and I can smell gas. I followed the instructions on the label of the heater to open the panel, turn off the electronic ignition, turn off the power switch, wait 15-20 mins and try again. This is how I've been dealing with this problem since last year. Now that won't work either and it just stays in SPK mode.
Any help is greatly appreciated!!