- Jun 2, 2013
- 3
I am new to pool ownership as I had recently purchased a home with a salt water pool.
I know nothing about it and had someone come in and open it for me and set everything up. My Pool Pilot Didigital Nano which uses RC35/22 cells had worked the first day. After that it is not working at all. I keep getting the Error Purifer off check flow message. I tried everything in the book to fix this but nothing has worked. Any suggestions on what else could be the problem? The only thing I couldnt do was get the Tri Sensor out and check that. Before I pay someone $150 to come look at it, I would like to know if there is anything else I can do.
20 X 40 inground pool 30,000 gallons. At start up the Autopilot worked and told me to add 125lbs of salt, the temp was 67 degrees.
I know nothing about it and had someone come in and open it for me and set everything up. My Pool Pilot Didigital Nano which uses RC35/22 cells had worked the first day. After that it is not working at all. I keep getting the Error Purifer off check flow message. I tried everything in the book to fix this but nothing has worked. Any suggestions on what else could be the problem? The only thing I couldnt do was get the Tri Sensor out and check that. Before I pay someone $150 to come look at it, I would like to know if there is anything else I can do.
20 X 40 inground pool 30,000 gallons. At start up the Autopilot worked and told me to add 125lbs of salt, the temp was 67 degrees.