Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: question on pump install

  1. Back To Top    #1

    question on pump install

    This forum has been great with help on my issues. I am replacing my old pump with a more energy efficient .5 hp TriStar. I have a 1.5 inch hayward multiport valve on my de filter. The new pump has a 2" connection. I have one of those clear curved 1.5 " pipes between the current Superpump and the valve. My question is how do I go from the 2" connection on the tristar to th 1.5" multiport valve. I was considering a short 2" piece of pvc attached to a reducer. I do not have the pump yet, so I have not looked at the connectors. Thanks in advance for any suggestions.
    19,000 vinyl pool, solar heat, .75 hp tristar, 48 sq ft de filter

  2. Back To Top    #2

    In the Industry

    duraleigh's Avatar
    Join Date
    Apr 2007
    Sebring, Florida

    Without a pic, that's pretty tough to envision.
    Dave S.
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

  3. Back To Top    #3
    You're right Dave, I will try to upload a picture this evening.
    19,000 vinyl pool, solar heat, .75 hp tristar, 48 sq ft de filter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts