Well it finally happened to me, I've had my Aqua Logic system going on my 4th season, I've been reading about the no cell issues for the past 3 years and I've had the nocellpower.com site bookmarked for the last two.
I resoldered the K1 burn solder spot and it worked for a week, I resoldered it ten times better and it worked for two more days, now I've got someone coming over that actually knows what they are doing but I know it will be a temp fix.
Is there an upgrade board that won't suffer this issue, I know I can upgrade to a pro logic board but I believe I read some of those boards have this issue too, they must have fixed this design flaw at one point.
I realize it was my own doing, I was careless and I had the chlorinator cell on while I added 5 bags of salt to bring me to my required opening season level of 3400PPM, lesson learned.
I resoldered the K1 burn solder spot and it worked for a week, I resoldered it ten times better and it worked for two more days, now I've got someone coming over that actually knows what they are doing but I know it will be a temp fix.
Is there an upgrade board that won't suffer this issue, I know I can upgrade to a pro logic board but I believe I read some of those boards have this issue too, they must have fixed this design flaw at one point.
I realize it was my own doing, I was careless and I had the chlorinator cell on while I added 5 bags of salt to bring me to my required opening season level of 3400PPM, lesson learned.
