Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Aqua Logic upgrade that won't have "No Cell Power" problem?

  1. Back To Top    #1

    Aqua Logic upgrade that won't have "No Cell Power" problem?

    Well it finally happened to me, I've had my Aqua Logic system going on my 4th season, I've been reading about the no cell issues for the past 3 years and I've had the nocellpower.com site bookmarked for the last two.

    I resoldered the K1 burn solder spot and it worked for a week, I resoldered it ten times better and it worked for two more days, now I've got someone coming over that actually knows what they are doing but I know it will be a temp fix.

    Is there an upgrade board that won't suffer this issue, I know I can upgrade to a pro logic board but I believe I read some of those boards have this issue too, they must have fixed this design flaw at one point.

    I realize it was my own doing, I was careless and I had the chlorinator cell on while I added 5 bags of salt to bring me to my required opening season level of 3400PPM, lesson learned.
    18' x 36" Ovalish 80,000 Litre Vinyl IGP. 2 speed 1HP Hayward pump SP2607X102S. 300 Pound Sand Filter. Summit Sum5 Heat Pump, Goldline Controls Aqua Logic P4 System, T-CELL-15 SWG, Aqua Pod Remote Control, Pentair 7845xx02 light.
    TF-100 Test Kit, SpeedStir Stirrer, Pool Chemist in training.

  2. Back To Top    #2
    mas985's Avatar
    Join Date
    May 2007
    Location
    Pleasanton, CA
    Posts
    11,486

    Re: Aqua Logic upgrade that won't have "No Cell Power" probl

    Quote Originally Posted by Rockstead
    I realize it was my own doing, I was careless and I had the chlorinator cell on while I added 5 bags of salt to bring me to my required opening season level of 3400PPM, lesson learned.
    That can definitely help cause the problem. Higher salt = higher amps which is what I think damages the board. I fixed my board two years ago, I keep salt levels below 3000 ppm and I haven't had the issue again.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  3. Back To Top    #3

    In the Industry

    JoshU's Avatar
    Join Date
    May 2007
    Location
    New Orleans, LA
    Posts
    541

    Re: Aqua Logic upgrade that won't have "No Cell Power" probl

    Are you looking for a complete automation system or standalone chlorine generator?
    Josh Ulfers - josh@saltpoolguys.com - 888-725-8766
    SaltPoolGuys.com - AutoPilot Pool Pilot Systems, Parts & Cells - AquaCal Heat Pumps

  4. Back To Top    #4

    Re: Aqua Logic upgrade that won't have "No Cell Power" probl

    Quote Originally Posted by JoshU
    Are you looking for a complete automation system or standalone chlorine generator?

    I've gotten very used to having an automation system, I would like to continue with one.

    Unfortunetely there is not too much discussion on the nocellpower site, if I could determine the design flaw has been fized in the pro logic boards, I would just change to one of those boards, although I read that might mean changing the display too, not 100% sure.
    18' x 36" Ovalish 80,000 Litre Vinyl IGP. 2 speed 1HP Hayward pump SP2607X102S. 300 Pound Sand Filter. Summit Sum5 Heat Pump, Goldline Controls Aqua Logic P4 System, T-CELL-15 SWG, Aqua Pod Remote Control, Pentair 7845xx02 light.
    TF-100 Test Kit, SpeedStir Stirrer, Pool Chemist in training.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •