I have a 9+ yr old Kirkland Signature gas grill (sold through Costco, built by Virco which is now Nexgrill)
The grill still works great but the electrodes in the ignitors "slid out" of the ceramic insulators. Im not sure what held them in there from the factory but once they slid out they would no longer create a spark to the light the burner. We've been using Scripto lighters for the past 2 years or so. Ive fixed it by using some high temp RTV to hold them in the ceramic insulator, but I was wondering if I could locate the actual part to have some on hand.
You can see what Im talking about here: http://www.appliancefactoryparts.com/se ... 095/123993 (I know its for a Ducane but thats the exact same setup my grill has)
I have yet to be able to find JUST the wire and bracket with insulator/electrode installed. I cant believe its not out there, its only one screw on the valve to remove and replace just the whole ignitor setup.
Has anyone seen them separate from the valve itself before?
Thanks in advance.
-Chris
The grill still works great but the electrodes in the ignitors "slid out" of the ceramic insulators. Im not sure what held them in there from the factory but once they slid out they would no longer create a spark to the light the burner. We've been using Scripto lighters for the past 2 years or so. Ive fixed it by using some high temp RTV to hold them in the ceramic insulator, but I was wondering if I could locate the actual part to have some on hand.
You can see what Im talking about here: http://www.appliancefactoryparts.com/se ... 095/123993 (I know its for a Ducane but thats the exact same setup my grill has)
I have yet to be able to find JUST the wire and bracket with insulator/electrode installed. I cant believe its not out there, its only one screw on the valve to remove and replace just the whole ignitor setup.
Has anyone seen them separate from the valve itself before?
Thanks in advance.
-Chris